Holzol Weather Stain

Description

holzöl Weather-Stain is a natural oil and resin based non peeling impregnating finish.

Can be used both internally and externally.

holzöl Weather-Stain is a natural oil and resin based non peeling impregnating finish. It contains UV-filters that offer excellent resistance to weathering and sunlight along with active ingredients to protect against mould and fungi.

Pleasant range of natural semi-transparent colours.

Recoat Time     4 – 6 hours,

Drying Time:       12 – 24 hours.

These times are dependant amounts applied, the absorbency of the wooden substrate and application conditions.

Approximately 12 – 26m² per litre depending upon the application method, absorbency and surface quality of the timber being coated.

Before starting make sure the surfaces of the timber to be coated should be clean, dry and free from oils, greases, waxes, silicones, old finishes etc.

Typical Coat on Coat Finish:

• Apply a thin, even coat of holzöl Weather-Stain Oil, by brush or roller. Apply the oil in the direction of the wood grain.
• Allow 10 – 12 hours to dry, then lightly abrade with 220/240 silicon carbide abrasive.
• Apply a second coat of holzöl Weather-Stain Oil, as above.

Typical Natural Stain Finish:

• Apply a thin, even coat of holzöl Weather-Stain Oil, by brush or roller. Apply the oil in the direction of the wood grain.
• Allow 10 – 12 hours to dry, then lightly abrade with 220/240 silicon carbide abrasive.
• Apply a coat of holzöl Weather-Oil Clear, as above.

Using these products in systems outside these guidelines can lead to immediate and latent problems with the integrity of the finish.

The holzöl Weather-Stain should be maintained using a clean, lightly damped cloth.

If the finish becomes “tired” looking or damaged, abrade with 240/320 silicon carbide abrasive and apply a further coat of holzöl Weather-Stain.